Category: Retrocomputing

One downside of working with the old Inmos Transputer devices is the rarity and cost of the original silicon. Obviously, you can’t sidestep the acquisition of the processor—unless you emulate—but what about replacing the IMS C011/C012 link chip? You need this (expensive) part to interface the transputer to the programming host, but as [Erturk Kocalar] […]
Indycar Racing 2 was a good game, back in 1995; in some ways, it was the Crysis of the Clinton years, in that most mortals could not run it to its full potential when it was new. Still, that potential was surely fairly limited, as we’re talking about a DOS game from 30 years ago. […]
The idea of gamifying all the things might have died down now that the current hype is shoving AI into all the things — but you’ve probably never seen it quite like EmuDevz, a game in which you develop an 8-bit emulator by [Rodrigo Alfonso]. There’s a lot of learning you’ll have to do along […]
Ok, you caught us. It certainly isn’t going to be the year of Algol. When you think of “old” programming languages, you usually think of FORTRAN and COBOL. You should also think of LISP. But only a few people will come up with Algol. While not a household name, it was highly influential, and now, […]
Those of us ancient enough to remember the time, or even having grown up during the heyday of the 8-bit home computer, may recall the pain of trying to make your latest creation work on another brand of computer. They all spoke some variant of BASIC, yet were wildly incompatible with each other regardless. BASICODE […]
Anyone into retro Macintosh machines has probably heard of BlueSCSI: an RP2040-based adapter that lets solid state flash memory sit on the SCSI bus and pretend to contain hard drives. You might have seen it on an Amiga or an Atari as well, but what about a PC? Once upon a time, higher end PCs […]
Back when the IBM PC was new, laying out an ISA board was a daunting task. You probably didn’t have a very fast ‘scope, if you had one at all. Board layout was almost certainly done on a drafting table with big pieces of tape. It was hard for small companies, much less hobbyists, to […]
Our hacker [Piers Finlayson] is at it again, and this time he has added USB support to One ROM. With this new connectivity you can attach your One ROM to your computer with a USB cable and then in a matter of seconds upload new firmware from your Chrome (or Chromium) web browser. This new […]
This week Jonathan and Aaron chat with Piers Finlayson about One ROM! Why does the retro-computing world need a solution for replacement ROMs? How difficult was it to squeeze a MCU and layout into the original ROM footprint? And what’s next for the project? Listen to find out! https://piers.rocks/ https://onerom.org/ https://github.com/piersfinlayson/one-rom https://github.com/piersfinlayson/airfrog Did you know […]
Taking on a refrigerator-sized minicomputer  is not for the faint-hearted, but [Usagi Electric] has done it with a DEC PDP-11/44. He’s not doing it in half measures either, for his machine is tricked out with an impressive array of upgrades. Among them however is no storage, and with two co-processors there’s a meager 3U of […]